Transcription

Swagelok HydrogenCompatibleProductsfor the Alternative FuelsIndustryGaseous Tube TrailerH2H2Electrolyzer SystemProducts that are compatible foruse in hydrogen on‑vehicle andH2infrastructure applications, availablefrom your local authorized sales andservice center.CompressorH2Compressed HydrogenStorage TanksDispenserThe design and operation ofhydrogen systems are theresponsibility of the user, who shouldobtain qualified assistance to ensuretheir safe use of hydrogen.Fuel Cell Electric Vehicles

2Swagelok Hydrogen-Compatible ProductsCo n t e n t sIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Hydrogen-Compatible Products for Applications Up to 1 378 bar (20 000 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Fittings With EC-79 Certification for Systems Above 30 bar (435 psig) and Up to 350 bar (5 076 psig) —H35 Pressure Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Valves With EC-79 Certification for Systems Above 30 bar (435 psig) and Up to 350 bar (5 076 psig)) —H35 Pressure Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Fittings With EC-79 Certification for Systems Above 30 bar (435 psig) and Up to 700 bar (10 159 psig) —H70 Pressure Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Ordering Numbers and Dimensions for Fittings With EC-79 Certification for Systems Above30 bar (435 psig) and Up to 350 bar (5 076 psig) — H35 Pressure ClassFittingsTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Ordering Numbers and Dimensions for Valves With EC-79 Certification for Systems Above30 bar (435 psig) and Up to 350 bar (5 076 psig) — H35 Pressure ClassMultipurpose Ball Valve (SK Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Alternative Fuel Service Ball Valve (AFS Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Ordering Numbers and Dimensions for Fittings With EC-79 Certification for Systems Above30 bar (435 psig) and Up to 700 bar (10 159 psig) — H70 Pressure ClassFittingsFK Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33IntroductionHydrogen fuel cell technology requires high-integrity fluid system components to fill and store hydrogen in cylinders and transferit to the fuel cell on the vehicle. Swagelok offers a wide range of fluid system components for use in many types of hydrogenrelated applications including the infrastructure that produces, transports, compresses, stores, and fills cylinders with hydrogenand for on-vehicle use.Swagelok products, as listed in this document, are compatible with both on-vehicle and infrastructure hydrogen applications.Hydrogen-compatible products have had the materials of construction reviewed for appropriateness for use with hydrogen.Some metals are susceptible to hydrogen embrittlement, specifically hardened Belleville springs and stems. These have beenreplaced with less susceptible materials for compatibility with hydrogen service. Some elastomers are also more susceptible tohydrogen degradation and have also been replaced with more resilient materials. Products not listed in this document may notbe suitable for hydrogen applications.On-Vehicle ApplicationsOn-vehicle applications include light-duty (car and van), heavy-duty (bus and truck), rail, ship, and aerospace. Componentsused in light-duty cars and vans and heavy-duty trucks and buses may require EC-79 certification for use at working pressuresabove 30 bar (435 psig). Specific testing is required to achieve this certification, including corrosion resistance, endurance,hydraulic pressure cycle testing, and external leakage testing. Products with this certification will be specially marked toreflect the approval. Products certified for EC-79 are based on the nominal pressure of either H35 or H70 pressure classes. Allproducts are tested and certified to the MAWP for the pressure class.Fuel Cell Electric VehiclesHydrogen-compatible Products AvailableRefer to Hydrogen-Compatible Products for ApplicationsUp to 1 378 bar (20 000 psig) on page 4 for additionalinformation. A ssembly-by-torque (AbT) fittings Pressure gauges F K series medium-pressure All-metal hosefittings VCO O-ring face seal fittings VCR metal gasket face seal fittings Swagelok tubing S wagelok CustomSolutions, such as CNCbent fuel lines

Swagelok Hydrogen-Compatible Products3EC-79 Certified Products:EC-79 certification for on vehicle applications come in two pressure classes: H35 Pressure class above 30 bar (435 psig) and Up to 350 bar (5 076 psig) see page 6 and 7 for additionalinformation. H70 Pressure class above 30 bar (435 psig) and Up to 700 bar (10 159 psig) see page 8 and 9 for additionalinformationInfrastructure ApplicationsInfrastructure applications include the dispensers, storage cylinders, compressors, separators, and pressure control devicesthat make up the station, as well as the hydrogen tube trailers that bring the hydrogen to the stations. Components in theselocations must be hydrogen-compatible but may not require specific certifications. In addition to standard Swagelok tubefittings, a range of FK series medium-pressure fittings, cone and thread fittings, hoses, valves, and pressure gauges that arehydrogen-compatible are available.Note: F or these applications, regional standards and specifications may vary. Please consult your local authorized Swageloksales and service center for more information.Gaseous Tube TrailerElectrolyzer SystemCompressorCompressed HydrogenStorage TanksDispenserThe following provides a list of products that are hydrogen-compatible for use in infrastructure applications. Refer to HydrogenCompatible Products for Applications Up to 1 378 bar (20 000 psig) on page 4 for additional information. Swagelok tube fittings and tubing FK series medium-pressure fittings and tubing FKB series medium-pressure ball valves IPT series and check valves IPT series cone and thread fittings and tubing AFS series ball valves FJ, FL, FM, and FX series hose S model pressure gauges Pipe fittings Swagelok Custom Solutions, such as filling, distribution, priority, and control panels and tubing manifolds.

4Swagelok Hydrogen-Compatible Products Hydrogen-Compatible Products for Applications Up to 1 378 bar (20 000 psig)These products may be ordered using standard ordering numbers given in the product literature, except where noted. Individualproduct ratings are as noted in the product literature.ProductProduct Type/SeriesAvailable SizesRefer to Tubing Data, MS-01-107, forpressure rating information.Straight, elbow, tee, and crossstandard tube fitting1/16 to 2 in.2 to 50 mmAssembly-by-Torque (AbT)1/4 to 1/2 in.6 to 12 mmRefer to Assembly-by-Torque (AbT)Fittings, MS-02-466Medium-pressure, FK series1/4 to 1 in.6 to 12 mmRefer to Medium- and HighPressure Fittings, Tubing, Valves, andAccessories, MS-02-472Medium- and high-pressurecone and thread,medium-pressure pipe fittingsand adapters1/4 to 1 1/2 in.Refer to Medium- and HighPressure Fittings, Tubing, Valves, andAccessories, MS-02-472NPT/ISO1/16 to 1 1/2 in.Refer to Pipe Fittings, MS-01-147,and Medium- and High-PressureFittings, Tubing, Valves, andAccessories, MS-02-472Male/female SAE3/16 to 1 in.Refer to Pipe Fittings, MS-01-147O-ring face seal1/8 to 1 in.Refer to VCO O-ring Face Seal Fittings,MS-01-28, add -EP to selectedordering numberMetal gasket face seal1/8 to 1 in.Refer to VCR Metal Gasket Face SealFittings, MS-01‑24, 316 stainless steelgaskets onlyFJ304 SS single braid layerreinforcement, 316L stainlesssteel annular convoluted core1/4 to 2 in.FL321 stainless steel single braidlayer reinforced, 316L stainlesssteel annular convoluted core1/4, 1/2 in.FM316L stainless steel single braidlayer reinforced, 316L stainlesssteel annular convoluted core1/4 to 2 in.FX321 stainless steel double braidlayer reinforced, 316L stainlesssteel annular convoluted core1/4 to 2 in.TubeFittingDescriptionWorking PressureandOrdering InformationCone and Thread,IPTPipeVCOwith ethylenepropylene O-ringsonlyVCRwith 316 stainlesssteel gaskets onlyHoseRefer to Hose and Flexible Tubing,MS-01‑180Please consult your local authorized Swagelok sales and service center with any questions.Products not listed in this document may not be suitable for hydrogen applications.Refer to Gaugeable Tube Fittingsand Adapter Fittings, MS-01-140, forordering information.

Swagelok Hydrogen-Compatible Products5 Hydrogen-Compatible Products for Applications Up to 1 378 bar (20 000 psig), continuedThese products may be ordered using standard ordering numbers given in the product literature, except where noted. Individualproduct ratings are as noted in the product literature.ProductProduct Type/Series316/316L seamlessinstrumentation gradeTubingMedium-pressureWorking PressureandOrdering InformationDescriptionStainless steel seamless tubing, ASTMA213/A269Refer to Stainless Steel Seamless Tubing andTube Support Systems, MS-01‑1811/8 to 2 in. and 3 to 25 mmStainless steel medium-pressure tubing,ASTM A213/A269Refer to Medium- and High-Pressure Fittings,Tubing, Valves, and Accessories, MS-02‑4721/4, 3/8, 1/2, and 3/4 in.Cone and threadStainless steel cone and thread tubing,medium-pressureASTM A213Refer to Medium- and High-Pressure Fittings,Tubing, Valves, and Accessories, MS-02‑4721/4 to 1 in.AFSValveFKBAlternative fuel service (AFS) ball valve,1/4‑turn, PEEK seatsRefer to Swagelok Alternative Fuel Service (AFS)Ball Valves, MS-02-303Medium-pressure trunnion-style ballvalve, PEEK seat700 bar at -40 C (10 152 psig at -40 F)1 034 bar at 85 C (15 000 psig at 185 F)SS-6FKBFK6-53402GaugeSKMultipurpose ball valve, 1/4-turn, PEEKseatsPGIS model industrial pressure gaugeRefer to Multipurpose Ball Valves, MS-02-345Refer to Process Gauges, Industrial and Process,MS-02-170Please consult your local authorized Swagelok sales and service center with any questions.Products not listed in this document may not be suitable for hydrogen applications.

6Swagelok Hydrogen-Compatible Products ittings With EC-79 Certification for Systems Above 30 bar (435 psig) and Up to 350 barF(5 076 psig) — H35 Pressure ClassProductProduct Type➀Available SizesDescriptionUnion - Swagelok tube fitting to Swagelok tube fittingPort connectorCapPlugMale connector - Swagelok tube fitting to1/4 in. male NPTTube fitting sizes:1/4, 5/16, 3/8, 1/2, 5/8 in.6, 8, 10, 12, 14, 15, 16 mmOrdering Information: pages 10 and 13Tube fitting sizes:1/4, 5/16, 3/8, 1/2, 5/8 in.6, 8, 10, 12, 14 mmOrdering Information: page 10Tube fitting sizes:1/4, 3/8, 1/2, 5/8 in.6, 8, 10, 12 mmStraightMale connector - Swagelok tube fitting to SAE/MS➁straight thread (ST and STH) fittingSAE/MS straight threadMale: ST: 7/16-20, 9/16-18,STH: 3/4-16Ordering Information: page 11Tube fitting sizes:1/4, 5/16, 3/8, 1/2 in.6, 8, 10, 12 mmFemale connector - Swagelok tube fitting to1/4 in. female NPTOrdering Information: page 111/4, 5/16, 3/8, 1/2 in.6, 8, 10, 12 mmReducer - Swagelok tube fitting to tube adapterOrdering Information: page 12Tube fittingUnion - Swagelok tube fitting to Swagelok tube fitting1/4, 5/16, 3/8, 1/2, 5/8 in.6, 8, 10, 12, 14, 15, 16 mmOrdering Information: page 14ElbowMale connector - Swagelok tube fitting to1/4 in. male NPTFemale connector - Swagelok tube fitting to1/4 in. female NPTUnion - all Swagelok tube fitting endsTube fitting sizes:1/4, 5/16, 3/8, 1/2 in.6, 8, 10, 12 mmOrdering Information: page 141/4, 5/16, 3/8, 1/2, 5/8 in.6, 8, 10, 12, 14, 15, 16 mmOrdering Information: page 15Tee1/4 in. Male branch NPT (TTM) with Swagelok tubefittings1/4 in. Female branch NPT (TTF) with Swagelok tubefittings1/4 in. Female run NPT (TFT) with Swagelok tubefittingsTube fitting sizes:1/4, 3/8 in.6, 8, 10, 12 mmOrdering Information: pages 15 and 16Tube fitting sizes:1/4, 3/8 in.6, 8, 12 mm1/4 in. Male run NPT (TMT) with Swagelok tubefittingsOrdering Information: page 15Cross1/4, 5/16, 3/8, 1/2 in.6, 8, 10, 12, 16 mmUnion - all Swagelok tube fitting endsOrdering Information: page 16➀ Additional sizes are available. Contact your local authorized Swagelok sales and service center for details.➁ O-ring material is 75 durometer fluorocarbon FKM.

Swagelok Hydrogen-Compatible Products7 ittings With EC-79 Certification for Systems Above 30 bar (435 psig) and Up to 350 barF(5 076 psig) — H35 Pressure Class, continuedProductProduct TypeDescription➀Available Sizes1/4 in. NPTTube adapter sizes:1/4, 5/16, 3/8, 1/2 in.6, 8, 10, 12 mmOrdering Information: page 17MaleSAE/MS straight threadST: 7/16-20, 9/16-18STH: 3/4-16SAE/MS straight thread(ST and STH)➁Tube adapterOrdering Information: page 17FemaleTube adapter sizes:1/4, 5/16, 3/8, 1/2 in.6, 8, 10, 12 mm1/4 in. NPTOrdering Information: page 17Hex nipple1/4 in.1/4 in. Male NPTOrdering Information: page 181/4 in.1/4 in. Female to 1/4 in. male NPTAdapterOrdering Information: page 18Male SAE/MS straight thread to 1/4 in. male NPT➁SAE/MS straight thread 7/16-20to 1/4 in. NPTMale SAE/MS straight thread to 1/4 in. female NPT➁SAE/MS straight thread 7/16-20to 1/4 in. NPTOrdering Information: page 18Ordering Information: page 18Pipe fittingReducerSAE/MS straight threadST: 9/16-18 to 7/16-20STH: 3/4-16 to 9/16-18 and3/4-16 to 7/16-20Male to female SAE/MS straight thread (ST)➁Ordering Information: page 191/4 in.Hex coupling1/4 in. Female NPTPlug1/4 in. Male NPTHollow hex plugMale SAE/MS straight thread(ST and STH)➁Hex head plugOrdering Information: page 191/4 in.Ordering Information: page 19SAE/MS straight threadST: 3/8-24, 7/16-20, 9/16-18, STH: 3/4-16Ordering Information: page 20SAE/MS straight threadST: 3/8-24, 7/16-20, 9/16-18STH: 3/4-16Male SAE/MS straight thread(ST and STH)➁Ordering Information: page 20➀ Additional sizes are available. Contact your local authorized Swagelok sales and service center for details.➁ O-ring material is 75 durometer fluorocarbon FKM. Valves With EC-79 Certification for Systems Above 30 bar (435 psig) and Up to 350 bar (5 076 psig)— H35 Pressure ClassSeriesDescriptionSKMultipurpose ball valve, 1/4-turn,PEEK seats, 10 mm Swagelok tubefittingAvailable SizesWorking Pressurebar (psig)10 mmOrdering Information:SS-4SKPS10MM-33397260 (3 770)at -40 to 120 C(-40 to 248 F)Additional Information on page 21AFSAlternative fuel service (AFS) ballvalve, 1/4-turn, PEEK seats,Female SAE/MS straight thread3/4-16Female SAE/MS straight thread 3/4-16Ordering Information:SS-AFSMS8-30259Additional Information on page 22413.7 (6 000)at -40 to 120 C(-40 to 248 F)

8Swagelok Hydrogen-Compatible Products ittings With EC-79 Certification for Systems Above 30 bar (435 psig) and Up to 700 barF(10 159 psig) — H70 Pressure ClassProductProduct Type➀Available SizesDescriptionUnion - FK series fitting to FK series fittingPort connectorCapPlugFK series fitting:1/4, 3/8, 1/2 in.6, 10, 12 mmOrdering Information: pages 23 to 27FK series fitting:1/4, 3/8, 1/2 in.6, 10, 12 mmMale connector - FK series fitting to1/4 in. male NPTOrdering Information: page 23Male connector - FK series fitting to SAE/MS straight➁thread (STH fitting)StraightFK series fitting:1/4, 3/8, 1/2 in.6, 10, 12 mmSAE/MS straight threadMale: STH: 7/16-20, 9/16-18Ordering Information: page 24Female connector - FK series fitting to1/4 in. female NPTFK series fitting:1/4, 3/8, 1/2 in.Ordering Information: page 243/8, 1/2 in.10, 12 mmReducing Union - FK series fitting to FK series fittingMediumPressure TubeFitting (FK Series)Ordering Information: page 24Reducer - FK series fitting to FK series fitting1/4, 3/8, 1/2 in.Ordering Information: page 24FK series fitting:1/4 in. and 6 mmMedium-Pressure Cone and Thread AdapterOrdering Information: page 251/4, 3/8, 1/2 in.6, 10, 12 mmUnion - FK series fitting to FK series fittingOrdering Information: page 26Elbow1/4, 3/8 in.6, 10 mmReducing Union - FK series fitting to FK series fittingOrdering Information: page 26Tee1/4, 3/8, 1/2 in.6, 10, 12 mmUnion - all FK series fitting endsOrdering Information: page 27Cross1/4, 3/8, 1/2 in.6, 10, 12 mmUnion - all FK series fitting endsOrdering Information: page 27Tube Adapter(FK Series)Male1/4 in. Male NPT1/4, 3/8, 1/2 in.Ordering Information: page 27➀ Additional sizes are available. Contact your local authorized Swagelok sales and service center for details.➁ O-ring is 90 durometer EPDM.

Swagelok Hydrogen-Compatible Products ittings With EC-79 Certification for Systems Above 30 bar (435 psig) and Up to 700 barF(10 159 psig) — H70 Pressure ClassProductProduct TypeDescription➀Available SizesUnion - Swagelok tube fitting to Swagelok tube fittingPort connectorCapPlugTube fitting sizes:1/4 in. and 6 mmMale connector - Swagelok tube fitting to1/4 in. male NPTOrdering Information: pages 28 and 29Tube fitting sizes:1/4 in. and 6 mmOrdering Information: page 28Tube fitting sizes:1/4 in. and 6 mmStraightMale connector - Swagelok tube fitting to SAE/MS straight➁thread (STH) fittingSAE/MS straight threadMale: STH: 7/16-20, 9/16-18,Ordering Information: page 28Female connector - Swagelok tube fitting to1/4 in. female NPTTube fitting sizes:1/4 in. and 6 mmOrdering Information: page 28Tube fittingReducer - Swagelok tube fitting to tube adapterUnion - Swagelok tube fitting to Swagelok tube fittingElbowMale connector - Swagelok tube fitting to1/4 in. male NPTFemale connector - Swagelok tube fitting to1/4 in. female NPTUnion - all Swagelok tube fitting endsTeeCross1/4 in. Male NPT branch (TTM) with Swagelok tube fittings1/4 in. Female NPT branch (TTF) with Swagelok tube fittings1/4 in. Female NPT (TFT) run with Swagelok tube fittings1/4 in. Male NPT (TMT) run with Swagelok tube fittingsUnion - all Swagelok tube fitting ends1/4 in. and 6 mmOrdering Information: page 291/4 in.Ordering Information: page 30Tube fitting sizes:1/4 in. and 6 mmOrdering Information: page 301/4 in. and 6 mmOrdering Information: page 31Tube fitting sizes:1/4 in. and 6 mmOrdering Information: page 311/4 in. and 6 mmOrdering Information: page 32Tube adapter sizes:1/4 in. and 6 mm1/4 in. NPTOrdering Information: page 32MaleSAE/MS straight thread(STH)Tube adapterFemaleSAE/MS straight threadSTH: 7/16-20Ordering Information: page 32Tube adapter sizes:1/4 in. 6 mm1/4 in. NPTOrdering Information: page 32➀ Additional sizes are available. Contact your local authorized Swagelok sales and service center for details.➁ O-ring is 90 durometer EPDM.9

10Swagelok Hydrogen-Compatible ProductsOrdering Numbers and Dimensions for Fittings With EC-79 Certification for SystemsAbove 30 bar (435 psig) and Up to 350 bar (5 076 psig) — H35 Pressure ClassMarkinge2400 0019Straight Tube Ordering NumberADimensions, 6Dimensions, 24.4Male ConnectorsNPTF DimensionsOrdering NumberADimensions, 38.740.943.444.1DE➀F➀ The E dimension is the minimum nominal opening. These fittings may have a largeropening at the pipe/straight thread end.Additional sizes are available. Contact your local authorized Swagelok sales and service center for details.

Swagelok Hydrogen-Compatible ProductsStraight Tube FittingsMale ConnectorsF flatO-ringSAE/MS Straight Thread (ST) and (STH - heavy wall)TubeODDASAE/MS➀ThreadSizeEAdapts to SAE J1926/1 and ISO 11926-1straight thread boss.DimensionsOrdering NumberADimensions, 9/16-18Dimensions, ➀ O-ring material is 75 durometer fluorocarbon FKM.➁ The E dimension is the minimum nominal opening. These fittings may have a largeropening at the pipe/straight thread end.Female ConnectorsF nsDEF1/41/41/41/4Ordering NumberADimensions, .250.280.413/43/43/413/161/41/41/41/4Dimensions, .47.99.519191922Additional sizes are available. Contact your local authorized Swagelok sales and service center for details.11

12Swagelok Hydrogen-Compatible ProductsStraight Tube FittingsReducersF flatTube ODTTxDEADimensionsTTxOrdering NumberADimensions, 22.84.15.67.19.522Dimensions, mmAdditional sizes are available. Contact your local authorized Swagelok sales and service center for details.

Swagelok Hydrogen-Compatible ProductsStraight Tube FittingsPort ng NumberEDimensions, .021.051.431.496810121516Dimensions, 57.1SS-12M1-PC-HV358.8SS-15M1-PC-HV35 11.2SS-16M1-PC-HV35 12.025.026.027.136.237.837.8Caps and PlugsDAPlugCapTubeOD1/45/163/81/25/8Ordering NumberADimensions, 660.900.96681012141516Dimensions, mmSS-6M0-C-HV3523.1SS-8M0-C-HV3524.5SS-10M0-C-HV35 26.6SS-12M0-C-HV35 30.6SS-14M0-C-HV35 31.4SS-15M0-C-HV35 31.4SS-16M0-C-HV35 erDimensions, in.1/4SS-400-P-HV355/16 -1010-P-HV35681012141516Dimensions, ditional sizes are available. Contact your local authorized Swagelok sales and service center for details.13

14Swagelok Hydrogen-Compatible Products90 ElbowsUnionsEF flatTubeODDAATube ports are identical.DimensionsEF , in.1/45/163/81/25/8Ordering NumberADDimensions, 81012141516Dimensions, 15/1615/16Male NPTEF nsions, in.SS-400-2-4-HV35 1.06SS-500-2-4-HV35 1.13SS-600-2-4-HV35 1.20SS-810-2-4-HV35 1.421/45/163/81/26810121/41/41/41/4Dimensions, 31.5-12M0-2-4-HV3536.0DimensionsDE➀F, 15.316.217.222.84.86.47.17.11/29/1611/1613/16➀ The E dimension is the minimum nominal opening. These fittings may have alarger opening at the pipe/straight thread end.Female NPTEDAF flatTubeODNPTSize1/45/163/81/2681012DimensionsDEF, in.1/41/41/41/4OrderingNumberADimensions, ons, .47.99.511/1611/1613/1613/16Additional sizes are available. Contact your local authorized Swagelok sales and service center for details.

Swagelok Hydrogen-Compatible ProductsTeesUnionsEF flatDAxTubeODAxATube ports are identical.OrderingNumberDimensionsDEF, in.1/45/163/81/25/8AAxDimensions, /25/85/813/161681012141516Dimensions, 0-3-HV35 63.031.5SS-12M0-3-HV35 72.036.0SS-14M0-3-HV35 77.638.8SS-15M0-3-HV35 77.638.8SS-16M0-3-HV35 .111.912.71/25/811/1613/16111MaleBranch, NPT 1/41/41/41/4Dimensions, 0M0-3TTM-HV3567.0SS-12M0-3-4TTM-HV35 72.015.316.217.222.8F flatADimensionsOrdering NumberADimensions, F, 3/1623.425.426.228.2➀ The E dimension is the minimum nominal opening. These fittings may have a largeropening at the pipe/straight thread end.Run, NPT (TMT)EAxDF , in.1/41/4Ordering NumberADimensions, .200.600.660.190.281/25/81/41/41/4Dimensions, 2M0-3-4TMT-HV35 �� The E dimension is the minimum nominal opening. These fittings may have a largeropening at the pipe/straight thread end.Additional sizes are available. Contact your local authorized Swagelok sales and service center for details.15

16Swagelok Hydrogen-Compatible ProductsTeesFemaleF flatEDAxRun, NPT (TFT)AxATube ports are AxDEF, in.1/41/4OrderingNumberADimensions, s, 0M0-3TFT-HV3555.9SS-12M0-3-4TFT-HV35 /1611/1613/1613/16Branch, NPT (TTF)F flatDATubeODNPTSizein.1/43/8681012DimensionsDEF, in.H1/41/4OrderingNumberADimensions, s, 0M0-3TTF-HV3567.0SS-12M0-3-4TTF-HV35 1622.422.422.422.4CrossUnionTubeODEADF flatATube ports are identical.DimensionsEF, in.1/45/163/8Ordering NumberADDimensions, V350.900.4113/1668101216Dimensions, -4-HV35 67.017.2SS-12M0-4-HV35 72.022.8SS-16M0-4-HV35 dditional sizes are available. Contact your local authorized Swagelok sales and service center for details.

Swagelok Hydrogen-Compatible ProductsTube AdaptersMaleNPTF ensionsOrderingNumberAE➀FDimensions, V351.750.289/166810121/41/41/41/4Dimensions, 14141416➀ The E dimension is the minimum nominal opening. These fittings may havea larger opening at the pipe/straight thread end.SAE/MS Straight Thread (ST) and (STH - Heavy Wall)F flatO-ringEATubeOD1/4Adapts to SAE J1926/1 and ISO 11926-1straight thread ensions, in.SS-4-TA-1-4ST-

Swagelok tubing Swagelok . Refer to Stainless Steel Seamless Tubing and Tube Support Systems, MS-01-181 Medium-pressure Stainless steel medium-pressure tubing, ASTM A213/A269 1/4, 3/8, 1/2, and 3/4 in. Refer to Medium- and High-Pressure Fittings, Tubing, Valves, and Accessories, MS-02-472