e-dokumen.id

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows modelNotes for BTO with SSDThe smallest capacity HDD/SSD among ordered disks is installed in the 1st HDD bay (as system disk) at factory. When the memory size is 96GB or more, system disk capacity should be at least 600GB. In that case, BTO with SSD is notpossible. If you want to use 400GB SSD as data disk in such a system, order the 400GB SSD separately and install it later.Cautions for using the RDR function When setting RDR, there are cases a FAT volume whose name is FTSERVER, is created with the size of 1MB. There is noproblem with deleting that volume. Refer to Chapter 1 (3. Setting Up Windows Server 2016) (3.10 Creating Volume) inInstallation Guide (Windows).Configuration of Dynamic diskA disk installed OS must not be configured as Dynamic disk. Please use as Basic disk. A disk not installed OS (means a disk saveduser data) can support Dynamic disk. If a mirrored volume (RAID-1) or RAID-5 volume is built on a dynamic disk, the System FT LED and Safe To Pull LED indicatingthe status of the ft server may not be displayed correctly, and information of duplex and simplex status of the PCI module maynot be output to the event log properly. If you are going to use a dynamic disk, convert only a data disk to a dynamic disk andbuild as a simple volume, spanned volume, or striped volume.Volumes on the dynamic disk can't be moved to another system because RDR setting don't be taken over. Please backupvolumes on the dynamic disk before you re-install the OS. After you re-install the OS, convert a data disk with RDR setting to adynamic disk and restore volumes.5 Optical DriveAvailable bays: 1Product Name / DescriptionPart NumberInternal DVD Super Multi Drive1 x DVD Super Multi drive, not including writing software(Standard)6 PCI Card6.1LAN ControllerCategoryProduct Name / DescriptionPart NumberLAN Controller1000BASE-T 2ch board kit : 2 x GbE NICIntel Ethernet Server Adapter I350-T2V2N8804-01210GBASE-T 2ch Adapter Kit : 2 x 10GbE NICIntel X550NOTE:N8804-013- Up to one controller per module- FCoE functionality is not supportedNOTE: For Microsoft Windows Server 2016 Standard / Datacenter Be sure to use NIC teaming feature (LBFO) supported by Windows Server 2016. For iSCSI (data) connection, NEC Storage M12e, M120, M320, M320F are supported. For NEC Storage, contact your salesrepresentative or refer to the NEC Storage WEB site. (http://www.nec.com/global/prod/storage/)6.2Fibre Channel / SAS ControllerCategoryProduct Name / DescriptionPart NumberFibre Channel ControllerFibre Channel 1ch Adapter Kit : 2 x FC ControllerQLogic QLE2670 16Gbps Fibre Channel AdaptersSAS Controller : 1 x SAS ControllerLSILogic SAS9300-8e 12Gbps Host Bus AdapterNOTE:- K410-322(02) SAS Cable is required for tape drive connectionN8803-040AFSAS ControllerN8803-041NOTE: For FC connection, NEC Storage M12e, M120, M320, M320F are supported. For NEC Storage, contact your salesrepresentative or refer to the NEC Storage WEB site. (http://www.nec.com/global/prod/storage/)NEC CorporationRevision 1.0, Feb. 201912

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows model7 Other Add-in Components7.1Input DevicesCategoryProduct Name / DescriptionPart NumberKeyboardMouseCableUSB KeyboardUSB Optical Wheel MouseUSB cable : 1.5m USB extension cableN8870-002AFN8870-012K410-177(1A)8 Add-on Components8.117-inch LCD Console DrawerCategoryDrawerw/ KVMSwitchDrawerw/o KVMSwitchProduct Name / DescriptionPart NumberDrawer17-inch LCD Console Drawer (8port)17-inch LCD, US 83-keys Keyboard, Optical mouse, 8 port KVM switch,1U height, blackN8143-106FCableSwitch Unit Connection Cable Set (USB, 1.8m)1.8 m, 1 x 15-pin mini D-SUB to 1 x 15-pin mini D-SUB / 1 x 4-pin USBASwitch Unit Connection Cable Set (USB, 3m)3 m, 1 x 15-pin mini D-SUB to 1 x 15-pin mini D-SUB / 1 x 4-pin USB ASwitch Unit Connection Cable Set (USB, 5m)5 m, 1 x 15-pin mini D-SUB to 1 x 15-pin mini D-SUB / 1 x 4-pin USB A17inch LCD Console Unit 1U17-inch LCD, US 83-keys Keyboard, Optical mouse, 1U height,4-pin USB B to 4-pin USB A cable 2 m, PS/2 Y-splitter cable 2m, 15-pinmini D-sub VGA cable 2 m, black17inch LCD Console Drawer (1port)17-inch LCD, US 103-keys Keyboard with 10-key, Touch pad with 3button, 1U height, 4-pin USB B to 4-pin USB A cable 1.8 m, Two PS/2cable 1.8 m, 15-pin mini D-sub VGA cable 1.8 m, blackKeyboard Unit (JP)JP 108-keys Keyboard with 10-key for N8143-108F 17inch LCDConsole Drawer (1port)Keyboard Unit (UK)UK 104-keys Keyboard with 10-key, for N8143-108F 17inch LCDConsole Drawer -118(05)N8143-105FN8143-108FN8143-109N8143-111KVM SwitchCategoryProduct Name / DescriptionPart NumberKVM SwitchServer Switch Unit (8 server)1U USB 8 port KVM switch, blackSwitch Unit Connection Cable Set (USB,1.8m)1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB ASwitch Unit Connection Cable Set (USB,3m)3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB ASwitch Unit Connection Cable Set (USB,3m)5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB ASwitch Unit Connection Cable 1.8 m1.8 m, 1 x 15-pin mini D-sub - 1x 15-pin mini D-Sub / 2x 118(03)K410-118(05)K410-119(1A)Flash FDDOrder the Flash FDD if you need to prepare an alternative for a floppy drive.Product Name / DescriptionPart NumberFlash FDDUSB flash emulating USB floppy disk, Native capacity 1.44 MBN8160-96NEC CorporationRevision 1.0, Feb. 201913

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows model8.4Tower Conversion KitProduct Name / DescriptionPart NumberTower Conversion Kit23 inch height pedestal with front bezel , for R320g-E4Tower Conversion Kit23 inch height pedestal with front bezel , for R320g-M4N8843-0058.5N8843-006Dust Proof FilterThe server supports the dust resistant feature. Choose the following kit to install the system in dusty places.CategoryProduct Name / DescriptionPart NumberFilter4U-FT Dust FilterFor R320e Dust Proof filter 10 pcs, attachment brackets for the frontbezel includedN8847-0028.6External Tape Drives8.6.1Tape Drive SelectionRefer to the section in accordance with your type of tape drives. LTO: Refer to 8.6.2RDX: Refer to 8.6.58.6.2LTO / SASCategoryProduct Name / DescriptionPart NumberControllerRequiredSAS Controller1 x Broadcom SAS9300-8e 12Gb/s SAS, 8(SFF-8644), PCIe3.0(x8),Low Profile / Full HeightExternal SAS cable2 m, for Tape Drive Enclosure connection1U Device Expansion Unit2 x 5-inch media baysPower Unitnon-hot plug power supplySAS CableFor 1U Device Expansion Unit internal connectionNOTE:- Required one per each tape drive.Internal LTO (SAS)LTO6, Half height, Native capacity 2.5 TB, blackInternal LTO (SAS)LTO7, Half height, Native capacity 6 TB, blackN8803-041External CableRequiredTape EnclosureRequiredPower SupplyRecommendedInternal CableDrive2 bays 335(00)N8151-129N8151-136Notes for Double BackupIn a single backup configuration, in case a CPU/IO module or backup device fails, backup is not possible until the failed part isrepaired or replaced. If this does not meet your system requirements, consider a double backup configuration.Refer to the following notes on double backup configuration. When configuring two sets of a SAS controller, a SAS cable and a backup device, two backup devices are recognizedseparately by the OS. When scheduling an automatic backup job, make a job for each backup device so that the other backupdevice can backup in case one device fails.With Arcserve Backup, backup is not executed if you enter an asterisk (*) in the group box under the destination tab whendefining a job. Be sure to create two backup jobs by correctly selecting the device group for the group box, and entering anasterisk (*) or the name of the media in the media box.NEC CorporationRevision 1.0, Feb. 201914

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows model8.6.4Supported Backup SoftwareSee the table below for the supported backup software on NEC Express5800 fault tolerant servers.For Microsoft Windows Server 2016 Standard / DatacenterTape drivePart NumberN8151-129N8151-136DescriptionInternal LTO6Internal LTO7Backup softwareArcserveBackupExecNetVaultArcserve r17.5Windows Server 2016 *a1 *a1BackupExec 20Windows Server 2016 *b1 *b1NetVault 12.XWindows Server 2016RPQRPQ*a1: Do not disable the tape driver on the device manager.*b1: Apply the device driver provided with tape driveNOTE: Disaster Recovery Option is not supported on the ft server system.8.6.5RDXCategoryProduct Name / DescriptionPart NumberInternal CableRequiredExternal CableRequiredInternal USB Cable1 x Internal USB Cable for USB3.0External USB Cable1.17 m, 1 x external USB3.0 to 1 x USB3.0 device, mount bracketincludedK410-349(00)Tape EnclosureRequiredPower supplyRecommendedDriveRequired1U Device Expansion Unit2 x 5-inch media baysPower Unitnon-hot plug power supplyInternal RDX (USB)RDX(USB), installed in N8141-69F 1U Device Expansion UnitN8141-69FK410-307(1A)N8181-124FN8151-125NOTE: Do not boot the OS from RDX. Remove the RDX from boot order or set the lowest priority on the BIOS setup menu. The eject button may be disabled when the OS is running. NTFS is recommended as the file system. exFAT is not supported. For backup software, use Windows Server Backup, Arcserve Backup or Backup Exec. Please do not access RDX from the OS directly, since RDX connection is not duplicated. Be sure to use backup software.8.7 RDX CartridgeProduct NamePart NumberRDX Cartridge (500GB)RDX Cartridge (1TB)RDX Cartridge (2TB)RDX Cartridge (3TB)RDX Cartridge (4TB)N8153-02N8153-03N8153-09N8153-10N8153-11NEC CorporationRevision 1.0, Feb. 201915

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows modelReferencesServer ManagementThe EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system management featureslisted in the table below.Hardware monitoringBoot monitoringAlertingRemote KVM(via LAN)Remote control(via LAN)OthersRemote wakeupCentralizedmanagementIndustry standardNEC CorporationTemperature/voltage/power/fan /degeneration (memory/hard drive)Hardware event log collection Booting, BIOS/POST stall, OS stall, shutdownHW error, Boot error and OS panic(by SNMP, E-Mail)POST/BIOS setup, DOS utilityPanic screen, Boot screenText-based screen (OS console) GUI-based screen (OS console) Remote reset/power on-off/ dumpOS shutdownRemote media (CD/DVD/FD) Server Management Command Line Protocol(DMTF compliant)Remote control via Web browser(without dedicated app)Remote batch Scheduling (without UPS) Set automatic IP address via DNS/DHCPWake On LAN, Wake On RingMonitoring and control of multiple servers IPMI2.0Revision 1.0, Feb. 2019 16

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows modelSupported PCI Cards and Installable SlotsR320g-E4Part ct NameSlot # :PCI Slot:Card height:Slot type:1000BASE-T 2ch board kit10GBASE-T 2ch board setFibre Channel board kitSAS boardSlots#1X8LPx8 1 1#2X8LPx8 1 1NotesMax. 1Max. 1Not installable when using Tower Conversion Kit.R320g-M4Part ct NameSlot # :PCI Slot:Card height:Slot type:1000BASE-T 2ch board kit10GBASE-T 2ch board setFibre Channel board kitSAS boardSlots#1X8LPx8 1#2X8LPx8 1#3X8FHx8 1 1Notes#4X8FHx8 1 1Max. 1Max. 1Not installable when using Tower Conversion Kit.NEC CorporationRevision 1.0, Feb. 201917

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows modelNotes for using Hyper-VBrief system interruption during synchronization processIn the synchronization process of CPU modules, a memory copy is performed to duplex memory on both CPU modules. Most of thememory area can be copied without interrupting the system through the so-called brownout copy method, and just a small portionrequires the system to stop. However, with Hyper-V, the system cannot use the brownout copy method. Therefore, the system doesnot respond for a longer period of time during the synchronization process of the CPU modules than without Hyper-V.See the table below for the reference values of interruption during re-synchronization of CPU/IO modules in a Hyper-V system. It isrecommended that your system design take the interruption into account.Model / Memory When using Hyper-V on a FT server, prepare a separate server for backup in the same way as for other general purpose serverswith Hyper-V. For backup patterns, refer to each backup software company's web site.NEC ESMPRO AgentFor monitoring guest operating systems, NEC ESMPRO Agent for Guest OS is required. Contact your sales representative for thissoftware.NEC CorporationRevision 1.0, Feb. 201918

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows modelAbout Windows Server License Count on ft ServerLicense definition (Windows Server 2016)The basic way to understand Windows Server 2016 license definition of ft Server is not different from that of a generalserver. It should be noted that licenses on ft Server are counted based on the number of physical cores, but when OSof OEM version is used, licenses are counted based on the number of cores mounted in one system on ft Server.Attention is required, on the other hand, in the case with OS (such as PKG version and VL version) other than OEMversion, the above special rule of core counting on one system is not applied.--Same as the conventional systems, “Server License” and “Client Access License (CAL)” are required. To useWindows Server 2016 server, CAL of Windows Server 2016 is necessary (old CAL such as that of Windows Server2012 cannot be applied, therefore, CAL of Windows Server 2016 should be purchased).The system of counting server license transitioned from “CPU-based license” to ”CPU core-based license”. If theconfiguration is within 2 CPUs with 16 cores, the rule of counting licenses are the same as before, however, if itexceeds 2 CPUs with 16 cores, the rule differs from before. Three rules 1.All physical cores in the server are required to be licensed.2.Each physical processor is required to be licensed with a minimum of 8 physical cores.3.Each physical server is required to be licensed with a minimum of 16 physical cores.[Ex.1] 10cores R320g-E4, 1CPU OEM version: 10 cores mounted on one system,but 16 core licenses are required according to the rule 3.other than OEM version: 20 core licenses are required for the cores mounted on both systems.[Ex.2] 10cores R320g-E4, 2CPUs OEM version: 20 core licenses are required for the cores mounted on one system.other than OEM version: 40 core licenses are required for the cores mounted on both systems.[Ex.3] 16 cores R320g-M4, 2CPUs OEM version: 32 core licenses are required for the cores mounted on one system.other than OEM version: 64 core licenses are required for the cores mounted on both systems.NEC CorporationRevision 1.0, Feb. 201919

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows modelCopyright Notice and Liability DisclaimerThe information contained herein is subject to change without notice.Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/orother countriesIntel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and othercountries.Linux is a trademark of Linus Torvalds.Red Hat is a registered trademark of Red Hat, Inc. in the U.S.All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respectiveholders.NEC shall not be liable for technical or editorial errors or omissions contained herein.For hard drive capacity measurements, 1 GB 1 billion bytes. Actual formatted capacity is less.NEC CorporationRevision 1.0, Feb. 201920

CONFIGURATION GUIDE – NEC Express5800/R320g / Windows modelRevision HistoryRevisionDateDescription1.0Feb. 22, 2019Initial releaseNEC CorporationRevision 1.0, Feb. 201921

CONFIGURATION GUIDE - NEC Express5800/R320g / Windows model NEC Corporation Revision 1.0, Feb. 2019 6 Rear View for R320g-M4 Legend A. USB Connectors G. Management LAN Connector B. USB Connectors (option, for backup use) H. VGA Connector C. PCI Slots (Low-Profile) I. Serial Port Connector 2 1 D. Power supply unit J. Serial Port Connector 1 1 E. Data LAN Connector K. Data LAN Connector .